Issue the chkconfig(1M) command to check that your station's standard networking software is correctly configured:
You see information similar to this:/etc/chkconfig
named off network on rwhod off timed on timeslave off gated off mrouted off rtnetd off snmpd on routed on
Note: Your output will vary from the output above depending upon installed software and configuration flag settings. If you are familiar with the network-related daemons, you can customize your configuration flags to suit your network needs. If you are not familiar with the network-related daemons, set your network-related flags as shown above. In particular, make sure that the network variable is configured on.